Efficiency of base isolation systems in structural seismic protection and energetic assessment     

Giuseppe Carlo Marano  Rita Greco 《地震工程与结构动力学》2003,32(10):1505-1531

This paper concerns the seismic response of structures isolated at the base by means of High Damping Rubber Bearings (HDRB). The analysis is performed by using a stochastic approach, and a Gaussian zero mean filtered non‐stationary stochastic process is used in order to model the seismic acceleration acting at the base of the structure. More precisely, the generalized Kanai–Tajimi model is adopted to describe the non‐stationary amplitude and frequency characteristics of the seismic motion. The hysteretic differential Bouc–Wen model (BWM) is adopted in order to take into account the non‐linear constitutive behaviour both of the base isolation device and of the structure. Moreover, the stochastic linearization method in the time domain is adopted to estimate the statistical moments of the non‐linear system response in the state space. The non‐linear differential equation of the response covariance matrix is then solved by using an iterative procedure which updates the coefficients of the equivalent linear system at each step and searches for the solution of the response covariance matrix equation. After the system response variance is estimated, a sensitivity analysis is carried out. The final aim of the research is to assess the real capacity of base isolation devices in order to protect the structures from seismic actions, by avoiding a non‐linear response, with associated large plastic displacements and, therefore, by limiting related damage phenomena in structural and non‐structural elements. In order to attain this objective the stochastic response of a non‐linear n‐dof shear‐type base‐isolated building is analysed; the constitutive law both of the structure and of the base devices is described, as previously reported, by adopting the BWM and by using appropriate parameters for this model, able to suitably characterize an ordinary building and the base isolators considered in the study. The protection level offered to the structure by the base isolators is then assessed by evaluating the reduction both of the displacement response and the hysteretic dissipated energy. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

高浓度黏性泥石流堆积层理结构中筛积层和粗化层形成机理的研究   总被引：5，自引：0，他引：5  

王裕宜  詹钱登  韩文亮  邹仁元 《沉积学报》2003,21(2):205-210

根据高浓度黏性泥石流的观测资料,应用不同类型黏性泥石流的流变特性和流体结构的分类指标-流核比,对高浓度黏性泥石流堆积中的混杂层、筛积层和粗化层理结构进行了成因差异分析。侧重分析了砾石质点在高浓度黏性泥石流蠕动流场中作向上垂直运动的魏森伯效应,并在表面富集形成了筛积层的成因,及其它与粗化层结构的区别。  相似文献   

地史过程中烃源岩有机质丰度和生烃潜力变化的模拟计算   总被引：17，自引：0，他引：17  

卢双舫薛海涛  钟宁宁 《地质论评》2003,49(3):292-297

在同时考察源岩中有机质因生、排烃而损失和无机质因成岩作用而失重的基础上，模拟计算了地史过程中，随有机质类型、初始有机质丰度、成熟度及排烃效率的改变，烃源岩有机质丰度和生烃潜力的变化，探讨了有机碳恢复系数及生烃潜力损失率的可能变化范围。结果表明，地史过程中，有机质生烃潜力和有机质丰度的变化主要取决于源岩的生、排烃效率，对性质偏差的有机质，有机质的实测丰度随演化程度的增高不降反升；而对位于高成熟阶段的优质有机质，有机碳的恢复系数可达2以上；随有机质类型变好和成熟度升高，生烃潜力损失率增高；一般情况下，有机质生烃潜力的恢复幅度比有机质丰度的恢复大得多。  相似文献   

利用GPS位移和主应力方向观测资料进行川滇地区边界力的联合反演研究     

独知行  刘经南 《武汉大学学报(信息科学版)》2003,28(2):162-166,176

在简要介绍了川滇地区的构造格局和构造运动特征的基础上，讨论了不同观测数据同时用于反演的合理性和物理意义，利用1998～2000年观测的9个测点位移数据和1986年以前所测的10个主应力方向数据，将边界力和相对权比λ作为待反演参数，并考虑了主要活动断裂运动特性，进行了弹性有限元数值反演计算。计算结果表明，现今川滇地区的构造活动主要力源仍来源于印度板块与欧亚大陆的碰撞，菲律宾海板块的挤压作用也不可忽略，这一结论说明了该地区现今构造运动的继承性活动特征。  相似文献   

From geometry to dynamics of microstructure: using boundary lengths to quantify boundary misorientations and anisotropy   总被引：1，自引：0，他引：1  

John Wheeler  Z. Jiang  D. J. Prior  J. Tullis  M. R. Drury  P. W. Trimby 《Tectonophysics》2003,376(1-2):19-35

The microstructure of a quartzite experimentally deformed and partially recrystallised at 900 °C, 1.2 GPa confining pressure and strain rate 10⁻⁶/s was investigated using orientation contrast and electron backscatter diffraction (EBSD). Boundaries between misoriented domains (grains or subgrains) were determined by image analysis of orientation contrast images. In each domain, EBSD measurements gave the complete quartz lattice orientation and enabled calculation of misorientation angles across every domain boundary. Results are analysed in terms of the boundary density, which for any range of misorientations is the boundary length for that range divided by image area. This allows a more direct comparison of misorientation statistics between different parts of a sample than does a treatment in terms of boundary number.The strain in the quartzite sample is heterogeneous. A 100×150 μm low-strain partially recrystallised subarea C was compared with a high-strain completely recrystallised subarea E. The density of high-angle (>10°) boundaries in E is roughly double that in C, reflecting the greater degree of recrystallisation. Low-angle boundaries in C and E are produced by subgrain rotation. In the low-angle range 0–10° boundary densities in both C and E show an exponential decrease with increasing misorientation. The densities scale with exp(−θ/λ) where λ is approximately 2° in C and 1° in E; in other words, E has a comparative dearth of boundaries in the 8–10° range. We explain this dearth in terms of mobile high-angle boundaries sweeping through and consuming low-angle boundaries as the latter increase misorientation through time. In E, the density of high-angle boundaries is larger than in C, so this sweeping would have been more efficient and could explain the relative paucity of 8–10° boundaries.The boundary density can be generalised to a directional property that gives the degree of anisotropy of the boundary network and its preferred orientation. Despite the imposed strain, the analysed samples show that boundaries are not, on average, strongly aligned. This is a function of the strong sinuosity of high-angle boundaries, caused by grain boundary migration. Low-angle boundaries might be expected, on average, to be aligned in relation to imposed strain but this is not found.Boundary densities and their generalisation in terms of directional properties provide objective measures of microstructure. In this study the patterns they show are interpreted in terms of combined subgrain rotation and migration recrystallisation, but it may be that other microstructural processes give distinctive patterns when analysed in this fashion.  相似文献   

用非线性映象法作钦州市月降水量预报的研究     

何小娟 《气象研究与应用》2003,24(1):23-25

选取反映大气环流作用的500hPa的三个因子场:1956～2001年环流特征量、振幅和位相资料作为预报因子与钦州市1957～2002年5月降水量求相关比,将求得的高相关比因子用非线性映象法制作钦州市1995～2002年5月的降水量预报,试报效果明显。  相似文献   

一种在异构系统中实现负载平衡的方法   总被引：2，自引：3，他引：2       下载免费PDF全文

金之雁  王鼎兴 《应用气象学报》2003,14(4):410-418

提出了在异构系统实现负载平衡的区域分解算法和实现负载平衡的计算方法，利用它的负反馈性质解决了异构系统处理机计算速度测量误差造成的负载测量不准问题，并对处理机速度变化，速度测量误差、处理机数量、网格点计算量的分布等因素的影响进行了计算，结果表明本方法具有很强的平衡负载能力和较强的适应性；根据计算结果提出了解决模式网格点计算量不易测量问题的解决方案，并用扩散方程和模拟物理过程进行试验，试验表明这种方法是可行的，平衡负载的效果十分显著。  相似文献   

Hilbert-Huang变换在密频结构阻尼识别中的应用   总被引：14，自引：3，他引：14  

陈隽  徐幼麟  李杰 《地震工程与工程振动》2003,23(4):34-42

Hilbert—Huang变换是一种新的数据处理方法，由经验模分解(Empirical Mode Decomposition)技术及Hilbert变换两部分组成。本文研究此方法对于密频结构阻尼识别的应用。首先对于两自由度系统模型，说明该方法用于阻尼识别的步骤。进而研究存在频率密集现象的高层建筑的阻尼识别问题。上述结果与理论值及由半功率带宽法的识别值进行了比较，对比显示Hilbert．Huang方法较传统方法具有良好的识别密频结构阻尼的性能，适用于大型结构的系统识别。  相似文献   

淮安市典型土动力特性的试验研究   总被引：3，自引：2，他引：3  

胡庆兴  刘雪珠  从卫民  陈国兴 《地震工程与工程振动》2003,23(6):144-148

通过对淮安市典型的全新世沉积粉土和粘性土进行室内自振柱试验及粉土的动三轴液化试验，把粉土和粘性土的自振柱试验结果与Seed和Idriss建议的砂土及饱和粘土的剪切模量比G／Gmax-γ曲线和阻尼比λ-γ曲线的变化范围进行对比，结果表明：粉土的剪模量比要比饱和粘土的大，而比砂土的剪模量比要小，其阻尼比接近于砂土的阻尼比；粘性土的剪模量比要比一般饱和粘土的大，而与砂土的剪模量比相近，其阻尼比要比砂土的略低；粉土的抗液化强度与液化振次之间的关系可以用指数函数来表示，其振动孔隙水压力的发展规律可以用反正弦三角函数拟合；粘粒含量是影响淮安市全新世沉积粉土抗液化强度的主要影响因素。  相似文献   

比值参数在高密度电法中的应用     

杨润海  赵晋明  王彬  李正光  卢吉高  曾祥凤 《地震研究》2003,26(2):197-200

探讨了比值参数在高密度电阻率法中的应用；根据工程实例说明比值参数在压制局部干扰和邻近异常分离中有良好效果；将比值参数断面与电阻率反演断面比较研究，能取得较好的异常解释效果。  相似文献